2
016-
06
34
PROFIBUS Commissioning
6. Select the entry
Driver > PNIO Comm DTM
.
7. Add the
PNIO Comm DTM
to your project window below
Host PC
. You can do this in any of
the following ways: drag and drop the DTM, double-click on the DTM, or click on
Host PC
,
and choose
Add device > PNIO Comm DTM
.
6.3
DTM Offline Project Tree
In your FDT application you have the option to generate the project tree in different ways. The
following section explains the offline generation.
Creating the Project Tree Offline
Ensure that you have created the PROFINET DTM project tree, see chapter 6.2. Ensure that
the PNIO Comm DTM line remains active, and proceed as follows:
1. In the Device catalog, open menu item
Fuchs GmbH > Device > HD2-GTR-
4PA.PN
.
2. Drag and drop or double-click the
HD2-GTR-4PA.PN
in order to add it to the
PNIO Comm DTM
node in the project window.
