2
0
1
9
-0
2
22
Normal Operation
Position value with fault values
("Error Replacement" parameter activated see chapter
AD: position value
Val max: maximum position value
Val min: minimum position value
AD.SP1: position value setpoint 1
AD.SP2: position value setpoint 2
h: hysteresis
1: lower limit of detection range
2: upper limit of detection range
3: no damping element
4: outside of the measuring range
Val min
s
AD
AD.SP1
AD.SP2
3
4
4
3
1
2
h
h
Val max
kein Bedämpfungsele.
unter Messbereich
über Messbereich
Note!
■
Fault values if "Error Replacement" is set accordingly (see chapter 11.3.3).
■
AD.SP2 < AD.SP1 does not invert the properties. This can be set using analog output
mode. See chapter 7.1.2.
