2-D Laser Scanner
Maintenance and Repair
2
0
1
6
-0
1
27
8
Maintenance and Repair
8.1
Maintenance
Observe the applicable national regulations when maintaining the sensor.
Essentially, the sensor is maintenance free. Nonetheless, check the technical
safety of the sensor system at regular intervals by looking for damage to the
housing. Check the sensor for dirt every now and then. To clean the sensor, wipe
it at regular intervals with a dry or damp soft cloth. This will ensure it continues to
function properly. The housing is made of plastic. For this reason, do not use
acetone or detergents containing solvents.
8.2
Repairs
If it appears that safe operation of the system is no longer possible, the system
must be taken out of operation and steps taken to prevent it being used
inadvertently. If the device needs to be repaired, return it to Fuchs. If you
open or modify the device yourself, not only are you endangering yourself and
others but you will void any warranty and absolve the manufacturer from any
liability.
