Pepperl+Fuchs IDENTControl IC-KP2-2HB18-2V1, Manual, Page: 60 / 90

20
12-
12
60
IC-KP2-2HB18-2V1
Commands
Single write words (SW --> 40h)
The command writes the number of words <WordNum> at the address
<WordAddr> once.
Master -> Slave
Address Bit no.
CH1 CH2* 15 8 7 0
RWw n RWw n+8 <WordNum> 0 1 0 0 0 0 0 0
RWw n+1 RWw n+9 <WordAddr> low byte <WordAddr> high byte
RWw n+2 RWw n+A <Write data> byte 2 <Write data> byte 3
RWw n+3 RWw n+B <Write data> byte 0 <Write data> byte 1
RWw n+4 RWw n+C <Write data> byte 2 <Write data> byte 3
RWw n+5 RWw n+D <Write data> byte 0 <Write data> byte 1
RWw n+6 RWw n+E <Write data> byte 2 <Write data> byte 3
RWw n+7 RWw n+F <Write data> byte 0 <Write data> byte 1
RWw n+8 <Write data> byte 2 <Write data> byte 3
RWw n+9 <Write data> byte 0 <Write data> byte 1
RWw n+A <Write data> byte 2 <Write data> byte 3
RWw n+B <Write data> byte 0 <Write data> byte 1
RWw n+C <Write data> byte 2 <Write data> byte 3
RWw n+D <Write data> byte 0 <Write data> byte 1
RWw n+E <Write data> byte 2 <Write data> byte 3
RWw n+F <Write data> byte 0 <Write data> byte 1
Slave -> Master
Address Bit no.
CH1 CH2* 15 8 7 0
RWr n RWr n+8 <WordNum> 0 1 0 0 0 0 0 0
RWr n+1 RWr n+9 <ReplyCounter> <Status>
n: Address in master module, specified by the assignment of the stations
*: 2 channel mode