P R O F I B U S P
O W E R
H
U B
S
E G M E N T
C
O U P L E R
Installation and Commissioning
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: G49 621 776-0 • USA +1 330 4253555 • Sin65 67799091 • Internet http://www.pepperl-fuchs.com
22
Dat
e
of
I
ssue
24.
3
.11
3
Installation and Commissioning
3.1
Mounting and Dismounting
Mounting Motherboards on a DIN rail
To mount a motherboard, proceed as follows:
1.
Place the motherboard on the DIN rail.
2.
Tighten the fastening screw in the middle of the motherboard to at-
tach the motherboard to the DIN rail.
The motherboard is mounted. Dismounting is performed in the reverse
order.
•
Mounting of HD2-* modules on the Motherboard
To install a new module on the motherboard, proceed as follows.
1.
Carefully center the polarisation holes and mate the two con-
nectors, then gently press down the module.
2.
Push down the red Quick Lok bars on each side of the module to
fix it to the panel (no tools required).
The new module is installed.
•
