31
0
2
.05.
2016
CC-Link Gateways
Accessing command interface
7.
Accessing command interface
7.1
Using BFM
This example describes one method of accessing a command interface when it is
mapped into the cyclic buffer memory area (when using VBG-CCL-G4F Mode, or
CC-Link V1 Mode)
BFM used for I/O data
(RY4 = 0)
Disable BFM
(set RY5 = 1)
Wait for BFM disable
acknowledge (RX5 = 1)
Switch to mailbox mode
(set RY4 = 1)
Wait for mailbox mode
acknowledge (RX4 = 1)
Write command interface request data
(including command and changed
toggle bit) to RWw area
1
Enable BFM
(set RY5 = 0)
Wait for BFM enable
acknowledge (RX5 = 0)
Summary of Contents for CC-LINK Series
Page 1: ...CC LINK GATEWAYS FACTORY AUTOMATION COMPACT MANUAL ...
Page 43: ......
