0
2
.05.
2016
8
CC-Link Gateways
Setting up the AS-i bus
4.
Setting up the AS-i bus
1.
Connect the unit to power.
2.
Connect the AS-i cable to the unit.
3.
One after the other connect the AS-i slaves to the AS-i cable and set the
slave addresses.
You may set the addresses directly on the slave using a portable addresser
or by using the option
[SLAVE ADR TOOL]
in the display menu of your
gateway.
4.
In the display menu select
[QUICK SETUP]
to use the configuration of all
AS-i circuits connected to the unit.
Confirm with
[STORE+RUN]
.
5.
Set the CC-Link address and connect the gateway
to the host fieldbus con-
troller.
You can set the addresses directly using the option
[CC-LINK]
in the dis-
play menu of your gateway or through the PC using the ASIMON software
with integrated AS-i Control Tools.
For more detailed information please refer to the installation guide for your gateway
which is included with the unit.
Summary of Contents for CC-LINK Series
Page 1: ...CC LINK GATEWAYS FACTORY AUTOMATION COMPACT MANUAL ...
Page 43: ......
