44
system specifications
System Dimensions:
See Pages 10 & 11
Shipping Weight ( lbs.):
LPS - 5
Operating Temp. Range:
40° F - 120° F
Supply Pressure Range:
* 5 -120 PSI max.
Supply Requirements:
Clean Air or Inert Gas
Safe Press. (CI/CII):
0.25" / 1.0"
Safe Pressure Flowrate:
** 0.1-3.5 SCFH
System Supply Fitting:
1/4" Tube Fitting
Enclosure Supply Fitting:
1/4" Tube Fitting
Enclosure Reference Fitting:
1/4" Tube Fitting
* With Enclosure Protection Vent - 120 PSI maximum
Without Enclosure Protection Vent - 5 PSI maximum
In order to comply with the NFPA 496 standard requiring
protection against over pressurization of the protected en-
closure, the installer must install one of the following items
in addition to the enclosure protection system.
a) Install a Enclosure Protection Vent on the protected
enclosure.
b) Install a tamper-proof regulator upstream of the
enclosure protection system's system supply inlet to
pre-regulate protective gas supply to 5 PSI max.
In addition, for small, tightly sealed enclosures, or to com-
pensate for a fluctuating protective gas supply, it may
be necessary to pre-regulate the protective gas supply
to a constant 5 PSI regardless of whether an Enclosure
Protection Vent is installed. This will reduce the amount of
"drifting" that can normally occur when maintaining a "Safe"
pressure inside a protected enclosure. The pre-regulation
can be accomplished by installing the TR-10 or TR-10G
Tamper-Proof Regulator accessories or equivalent.
Material specifications
Regulator Body:
zinc w/ Enamel Finish, Brass
Regulator Handle:
Polycarbonate
Enclosure Pressure Gauge:
ABS Plastic
Tube Fittings:
316 SS Forged Body
Tubing:
316 SS 1/4" .035 Welded
System Nameplates:
Silkscreened Lexan
®
& SS
Fastener Hardware:
zink Plated & Stainless Steel
Mounting Plate:
316 14 Ga #3 Brush SS
EXP Pressure Switch Body:
Anodized Cast Alum.
Enclosure Warning Nameplate:
Silkscreened SS
Recommended spare parts
Qty Description
Part # (supercedes)
1
Enclosure Pressure Indicator-CI
510023
1
Enclosure Pressure Indicator-CII
513235
1
Enclosure Pressure Control Regulator
513653
1
Installation & Operation Manual
129-0200
1
Enclosure Warning Nameplate-CI
513008
1
Enclosure Warning Nameplate-CII
513009
Please call and reference the above part number for
current spare parts pricing. Immediate pricing is available
to all confirmed customers.
Installation tools & testing Equipment
1/2" chuck drill
Complete set of drill bits
1/2" conduit knockout punch or 0.875" hole saw
Complete set of tubing, conduit bending, instrument fitting
and electrical craftsman hand tools
0 - 250 scfh flowmeter (connected upstream of the Protection
System to determine air consumption and flow during set-
up procedure)
General Information
Model 1001a system accessories
optional Enclosure protection Vents
EPV-1-SA-00
Straight w/ Spark Arrestor
EPV-1-SA-90
Rt Angle w/ Spark Arrestor
additional Items
SMK-1, -4*
System Mounting Kit
ILFK-4*
1/4" In-line Filter Kit
SC-4*
1/4" x 1/4" straight Connector
EPSK-1
Class I, Group C - D Pressure Switch
Kit
EPSK-1A
Class I, Group A - D Pressure Switch
Kit
EPSK-2
Class II, Group E - G Pressure Switch Kit
GPSK-1
Class I, General Purpose Switch Kit
GPSK-2
Class II, General Purpose Switch Kit
RAH
Div. 1 Remote Alarm Horn
RAB-1
Div. 1 Remote Alarm Beacon
RAB-2
Div. 2 Remote Alarm Beacon
LCK
L Fitting Conduit Kit
TCK
T Fitting Conduit Kit
PIAD
Purgeable Instrument Access Door
TR-10
Tamper-Proof Regulator
TR-10G*
Tamper-Proof Regulator w/ Gauge
PR-10
Precision Regulator
PR-10G
Precision Regulator w/ Gauge
* These items are provided as part of the Hoffman Kit.
** Accessory items are available through Fuchs.
Please consult the Fuchs Customer Service De-
partment for suitability of items for this assembly before
purchase.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-6798-Hoffman-A1001YZUMC2-Purging-Pressurization-System-10-CF.aspx