AWARD BIOS 3-9
IRQ4 (COM 1)
: ON
IRQ5 (LPT 2)
: ON
IRQ6 (Floppy Disk)
: ON
IRQ7 (LPT 1)
: OFF
IRQ8 (RTC ALARM) : OFF
IRQ9 (IRQ2 Redir)
: ON
IRQ10 (Reserved)
: ON
IRQ11 (Reserved)
: ON
IRQ12 (PS/2 Mouse)
: ON
IRQ13 (Coprocessor)
: ON
IRQ14 (Hard Disk)
: ON
3-4 POWER MANAGEMENT SETUP
Choose the "
POWER MANAGEMENT SETUP
" in the
CMOS SETUP
UTILITY
to display the following screen. This menu allows user to modify the
power management parameters and IRQ signals. In general, these parameters
should not be changed unless it's absolutely necessary.
Figure 3-5 POWER MANAGEMENT SETUP
ROM PCI/ISA BIOS (2A59CPA9)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
IRQ15 (Reserved)
: ON
Again, user can move the cursor by pressing direction keys to the field need to be
modified and press <PgDn> or <PgUp> to alter item selection. You can only change
the content of
Doze Mode
,
Standby Mode
, and
Suspend Mode
when the
Power
Management
is set to '
User Define
'.
IRQ3 (COM 2)
: ON
3-4-1 The Description of the Power Management
A. Power Management
mode selection :
Disabled :
The system operates in NORMAL conditions (Non-GREEN), and
and the Power Management function is disabled.
Max.saving:
This mode will maximize the power saving capability.
Min.saving:
This mode will minimize the power saving capability.
User define:
Allow user to define timeout parameters to control power saveing
timing. Refer item B shown below.
Power Management : User Define
PM Control by APM : Yes
PM Control by APM : V/H SYNC+Blank
Doze Mode : Disabled
Standby Mode : Disabled
Suspend Mode : Disabled
HDD Power Down : 15 Min
IRQ3 (Wake-Up Event) : ON
IRQ4 (Wake-Up Event : ON
IRQ8 (Wake-Up Event) : ON
IRQ12 (Wake-Up Event) : ON
Power Down Activites
Esc : Quit
: Select Item
F1 : Help PU/PD/+/- : Modify
COM Ports Accessed : ON F5 : Old Values (Shift)F2 : Color
LPT Ports Accessed : ON F6 : Load BIOS Defaults
Drive Ports Accessed : ON F7 : Load Setup Defaults
