3-6 CHAPTER 3
3-3 CHIPSET FEATURES SETUP
Choose the "
CHIPSET FEATURES SETUP
" in the
CMOS SETUP UTILITY
menu to display following menu.
ROM PCI/ISA BIOS (2A59CPA9)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
PCI Concurrency : Disable
PCI Streaming : Disabled
DRAM Timing : 60ns PCI Bursting : Enabled
Onboard FDC Controller : Enabled
Onboard Serial Port 1 : COM 1
System BIOS Cacheable : Disabled Onboard Serial Port 2 : COM 2
Video BIOS Cachlable : Enabled Onboard Parallel Port : 278H
8 Bit I/O Recovery Time : 1 Parallel Port Mode : ECP + EPP
16 Bit I/O Recovery Time : 1
ECP Mode DMA Select : DMA3
Memory Hole At 15M-16M : Disabled
IDE HDD Block Mode : Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto ESC : Quit : Select Item
IDE Secondary Master PIO : Auto F1 : Help PU/PD/+/- : Modify
IDE Secondary Slave PIO : Auto F5 : Old Valume (Shift )F2 : Color
Onboard Primary PCI IDE : Enabled F6 : Load BIOS Defaults
Onboard Secondary PCI IDE : Enabled F7 : Load Setup Defaults
Figure 3-4 CHIPSET FEATURES SETUP
If you don't use the Onboard IDE connector, than use On-card
(PCI or ISA card) IDE connector. You will set Onboard Primary
IDE: Disabled and Onboard Secondary IDE: Disabled from
CHIPSET FEATURES SETUP UTILITY.
The Onboard PCI IDE cable should be
equal to or less than
18 inches (45 cm.).
Note:
DRAM Timing:
The default value is 60ns.
60ns
:
2 (faster) Burst Wait State, for 60~70ns Fast Page Mode/EDO DRAM.
70ns
:
3 (slower) Burst Wait State, for 70ns Fast Page Mode/EDO DRAM.
Video BIOS Cacheable
:
The default value is Enabled.
Enabled
:
This field Enabled the Video BIOS Cacheable to speed up the VGA
Performance.
Disabled
:
Disabled the Video BIOS Cacheable function.
8/16 Bit I/O Recovery Time:
The default value is 1.
8 Bit I/O Recovery Time
:
This field defines the recovery time from 1 to 8 for 8-bit
I/O.
16 Bit I/O Recovery Time
:
To define the recovery time from 1 to 4 for 16-bit I/O.
PCI Slot IDE 2nd Channel : Enabled
