AWARD BIOS 3-7
Memory Hole At 15M-16M:
The default value is Disabled.
Disabled
:
Normal Setting.
Enabled :
This field enableds the main memory (15~16MB) remap to ISA BUS.
IDE HDD Block Mode:
The default value is Enabled.
Enabled
:
Enabled IDE HDD Block Mode. The HDD transfer rate is better than
Disable.
Disabled
:
Disable IDE HDD Block Mode.
IDE Primary Master PIO:
The default value is Auto.
Auto
:
BIOS will automatically detect the Onboard Primary Master PCI IDE
HDD Accessing mode.
Mode0~4
:
Manually set the IDE Accessing mode.
IDE Primary Slave PIO:
The default value is Auto.
Auto
:
BIOS will automatically detect the Onboard Primary Slave PCI IDE
HDD Accessing mode.
Mode0~4
:
Manually set the IDE Accessing mode.
IDE Secondary Master PIO:
The default value is Auto.
Auto
:
BIOS will automatically detect the Onboard Secondary Master PCI IDE
HDD Accessing mode.
Mode0~4
:
Manually set the IDE Accessing mode.
IDE Secondary Slave PIO:
The default value is
Auto
:
BIOS will automatically detect the Onboard Secondary Slave PCI IDE
HDD Accessing mode.
Mode0~4
:
Manually set the IDE Accessing mode.
Onboard Primary PCI IDE:
The default value is Enabled.
Enabled
:
Enable Onboard 1st channel IDE port.
Disabled
:
Disable Onboard 1st channel IDE port. When use On-card (PCI or ISA
card) IDE connector.
Onboard Secondary PCI IDE:
The default value is Enabled.
Enabled
:
Enable Onboard 2nd channel IDE port.
Disabled
:
Disable Onboard 2nd channel IDE port When use On-card (PCI or ISA
card) IDE connector.
PCI Slot IDE 2nd Channel:
The default value is Enabled.
Enabled
:
Enable secondary IDE port and BIOS will assign IRQ15 for this port.
Disabled
:
Disable secondary IDE port and IRQ15 is available for other device.
PCI Concurrency:
The default value is Enabled
PCI Streaming:
The default value is Enabled
