BIOS Configuration
________________________________________________________________
________________________________________________________________
29
•
Onboard Serial Port1
The default value is COM1.
COM1
Enable onboard Serial port1 and address is 3F8H
COM3
Enable onboard Serial port1 and address is 3E8H
None
Disable onboard Serial port1
•
Onboard Serial Port2
The default value is COM2.
COM2
Enable onboard Serial port2 and address is 2F8H
COM4
Enable onboard Serial port2 and address is 2E8H
None
Disable onboard Serial port2
4.8. PCI SLOT CONFIGURATION
ROM PCI / ISA BIOS
PCI SLOT CONFIGURATION
AWARD SOFTWARE, INC.
: Select Item
ESC
F1
F5
F6
F7 : Load Setup Defaults
: Quit
: Help
: Old Values
: Load BIOS Defaults
PU/PD/+/-
(Shift)F2
: Modify
: Color
SLOT 1 INT# Map To
: AUTO
SLOT 2 INT# Map To
: AUTO
SLOT 3 INT# Map To
: AUTO
GA-410 NCR PCI SCSI
: SLOT1
1st Available IRQ
: 9
2nd Available IRQ
: 10
3rd Available IRQ
: 11
4th Available IRQ
: 12
5th Available IRQ
: 5
PCI IDE IRQ Map To
:ISA
PCI VGA Fully 32bit Access : Off
PCI-to-CPU Write Buffer
: On
PCI-to-CPU Read Buffer
: Off
•
SLOT 1~3 INT# Map To
The default value is AUTO.
AUTO
The BIOS auto detect the PCI device using INTA ~ D and auto set up a available IRQ to let
device use.
A ~ D
For some not PCI specification compliant device, the user must set up IRQ manually.
•
GA-410 NCR PCI SCSI
The default value SLOT1.
The GA-410 NCR 810 PCI SCSI card has a Jumper to select the card to be Primary or Secondary card. If the card is
been set up to Primary then the user must set up the selection correctly (and the INT#A must be used). If the card is
been set up to Secondary then the user only set up the above selections.
•
Available IRQ
The default value is shown on the above table.
These available IRQs are Mapped to be PCI INT# by BIOS for PCI device automaticly. If some one IRQ is used by
