Pentek 52791, Getting Started Manual, Page: 3 / 14

Model 52791 Getting Started Guide Page 3
Rev. 1.0
What’s in the Box?
Your shipment of the Pentek Model 52791 should include the items on the following
list. If anything is missing or damaged, contact Pentek immediately at (201) 818 − 5900.
Please save the shipping container and packing material in case reshipment is required.
The list above includes all the standard parts that are shipped with the Pentek Model
52791. The options for this product are described in this Getting Started Guide and in the
Pentek Model 52791 Installation Manual (included in the box).
NOTE: Model 52791 requires two VPX slots: one in which to install the Model 52791
assembly and a vacant slot to the right of it, required to accommodate the
JTAG board.
NOTE:
If your Model 52791 has Option 741, you must use a 5HP width (1") VPX slot.
Quantity Part Number Description
1
002.52791
Model 52791 board set (consisting of the Model
71791 mounted on the Model 5201 3U VPX carrier)
1 300.70001 Front Panel Gasket
2 356.00015 Shorting Plugs
3 353.02607
26 − Pin Socket for Ribbon Cable (Sync)
a
a. To purchase separately, use Pentek Model 2140-998.
1 378.62602 26 − Conductor Ribbon Cable, 30GA 025 (Sync)
4 385.30200 Mounting Screws (2.5x6mm Phillips)
1 174.50010 1.55V Silver Oxide Battery (see Note below)
1 900.10153 Hex key, 3/32” (option 763 only)
1 808.52791 Instruction Manual Kit (all included manuals)