Pentax Optio 430 Page 45 Operating Manual Download

Page: 45 / 51

Appendix

Messages

Messages such as the following may be displayed on the LCD monitor
during camera operation.

Compression error

No base image found

Memory card full

No images in camera

Camera can not display this
image

This image is protected

No card in camera

Battery depleted

Battery depleted, the image
is not stored.

Memory card error

Compression of the image you captured is
in fail. Change the recorded pixels or quality
levels, and take a picture again.

You are trying to take a picture in Multiple
Exposure mode when there is no base
image or the saved images are all movie
pictures.

The CF card memory is full and no more
images can be saved. Insert a new CF card
or delete unwanted images. (p.14, p.58)
Change the quality/size and try again.
(p.44, p.45)

There are no images on the CF card.

You are trying to play back an image in a
format not supported by this camera. You
may be able to display it on another brand
of camera or PC.

The image you are trying to delete is a pro-
tected image. (p.60)

There is no CF card in the camera. (p.14)

The battery is exhausted. Charge the battery
or replace with a charged battery. (p.10, p.11)

The battery is exhausted. The image you just
captured has not been saved. Charge the bat-
tery or replace with a charged battery. (p.10,
p.11)

Shooting and playback are impossible due
to a problem with the CF card. Try display-
ing on a PC.

This card is not formatted

Image recording...

DPOF settings recording...

Movie recording...

(Un)Protecting...

Formatting...

Deleting image...

Alarm was set

Image folder can not be cre-
ated.

This image can not be used
to the base image.

The card you have inserted is unformatted
or has been formatted on a PC or other
device. (p.72)

The image is being recorded on the CF
card.

The DPOF settings are being recorded on
the CF card.

The movie picture is being recorded on the
CF card.

The image is being protected or unprotect-
ed.

The CF card is being formatted.

The image is being deleted.

The alarm has been enabled.

The largest file number is assigned to an
image and no more images can be saved.
Insert a new CF card or format the CF
card.

You have selected an invalid image for the
base image in Multiple Exposure mode.

KB320(81-93)E.QE33 9/12/01 5:10 PM Page 82

Summary of Contents for Optio 430




















































Search results

Summary of Contents for Optio 430

Reviews:

Related manuals for Optio 430

Brands by name

Popular brands

Pentax Optio 430, Operating Manual

Search results

Summary of Contents for Optio 430

Reviews:

Related manuals for Optio 430

Brands by name

Popular brands