Pentax Optio 430 Page 8 Operating Manual Download

Page: 8 / 51

●

Approximate Operating Time (when fully charged)

Number of recordable images

LCD monitor ON

LCD monitor OFF

Playback time

With the flash
fired for 50%

Approx. 130

Approx. 160

Approx. 75 min.

of the shots

Without the flash

Approx. 160

Approx. 200

* The above table is based on Pentax measuring conditions and may vary

depending on capture mode and shooting conditions.

Performance of the battery may deteriorate in low tempera-
tures.

●

Battery Level Indicator

You can check the battery level by the

symbol displayed on

the LCD monitor.

(lit green)

: Adequate power remains.

↓

(lit green)

: Battery is running low.

↓

(lit yellow)

: Battery is running very low.

↓

(lit red)

: Battery is exhausted.

↓

[Battery depleted] : After the message is displayed, the camera

will turn off.

Caution

Using the AC Adapter (optional)

If you intend to use the LCD monitor for a long time or connect the
camera to a PC, use of the AC adapter D-AC2 (optional) is recom-
mended.

Connect the AC plug cord to the AC adapter.

Plug the AC plug cord into the power outlet.

Open the terminal cover of your camera and connect the
AC adapter to the DC input terminal.

When using the AC adapter, the battery level indicator is not dis-
played on the LCD monitor.

• Make sure that the camera is turned off before connecting

the AC adapter.

• When using the AC adapter D-AC2, be sure to read the

operation manual accompanying the AC adapter.

Caution

memo

Getting Star

ted

Getting Star

ted

Terminal cover

AC adapter

AC plug cord

KB320(01-17)E.QE33 9/12/01 2:27 PM Page 12

Summary of Contents for Optio 430




















































Search results

Summary of Contents for Optio 430

Reviews:

Related manuals for Optio 430

Brands by name

Popular brands

Pentax Optio 430, Operating Manual

Search results

Summary of Contents for Optio 430

Reviews:

Related manuals for Optio 430

Brands by name

Popular brands