Pentax MG2E60-BLK - Optio E60 10.1MP Digital Camera Operating Manual Download

Page: 27 / 181

Gettin

Sta

rte

Precautions When Using an SD Memory Card

• The SD Memory Card is equipped with a

write-protect switch. Setting the switch to

LOCK protects the existing data by

prohibiting recording of new data, deletion

of existing data or formatting of the card.

appears on the display when the card is

write-protected.

• Care should be taken when removing the SD Memory Card immediately after

using the camera, as the card may be hot.

• Do not remove the SD Memory Card or turn the camera off while data is being

saved to the card, images or sound files are being played back, or the camera

is connected to a computer with the USB/AV cable, as this may cause the

data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away

from water and store away from high temperature.

• Do not remove the SD Memory Card during formatting as this may damage

the card and render it unusable.

• The data on the SD Memory Card may be deleted in the following

circumstances. We do not accept any liability for data that is deleted

(1) when the SD Memory Card is mishandled by the user.

(2) when the SD Memory Card is exposed to static electricity or electrical

interference.

(3) when the card has not been used for a long time.

(4) when the card is ejected or the batteries are removed while the data on

the card is being recorded or accessed.

• If the SD Memory Card is not used for a long time, the data on the card may

become unreadable. Be sure to regularly make a backup of important data on

a computer.

• Avoid using or storing the card where it may be exposed to static electricity or

electrical interference.

• Avoid using or storing the card in direct sunlight or where it may be exposed

to rapid changes in temperature or to condensation.

• When using an SD Memory Card with a slow recording speed, recording may

stop while you are taking movies even when there is adequate space in the

memory, or shooting and playback may take a long time.

• For information on compatible SD Memory Cards, visit the PENTAX website.

• Be sure to format an SD Memory Card that is unused or has been used on

another camera. Refer to “Formatting an SD Memory Card”. (p.140)

• Please note that formatting the SD Memory Card will not necessarily delete

the data so that it cannot be recovered using off-the-shelf data recovery

software. There are off-the-shelf secure data deletion software programs

available that will completely delete the data. If you are going to discard, give

away or sell your SD Memory Card, you should ensure that the data on the

card is completely deleted or the card itself is destroyed if it contains any

personal or sensitive information. In any case, the data on your SD Memory

Card should be managed at your own risk.

Write-protect switch

Summary of Contents for MG2E60-BLK - Optio E60 10.1MP Digital Camera






















































































































































































Search results

Summary of Contents for MG2E60-BLK - Optio E60 10.1MP Digital Camera

Reviews:

Related manuals for MG2E60-BLK - Optio E60 10.1MP Digital Camera

Brands by name

Popular brands

Pentax MG2E60-BLK - Optio E60 10.1MP Digital Camera, Operating Manual

Search results

Summary of Contents for MG2E60-BLK - Optio E60 10.1MP Digital Camera

Reviews:

Related manuals for MG2E60-BLK - Optio E60 10.1MP Digital Camera

Brands by name

Popular brands