Pentax K-30, Operating Manual

Page: 260 / 364

258
Ap
pen
di
x
10
The Shake Reduction function operates by obtaining the lens information
such as focal length. Set the focal length when using a lens for which the
focal length information cannot be automatically obtained.
1
Make sure that [Shake Reduction] is activated, and turn the
camera off.
Refer to “Reducing Vertical and Horizontal Camera Shake” (p.114) for
details.
2
Attach a lens, and turn the camera on.
The [Input Focal Length] screen appears.
3
Turn the rear e-dial (
S
) to set the
focal length.
Select from the following focal length
values. (The default setting is 35 mm.)
4
Press the
4
button.
The camera is ready to take a picture.
Setting the Focal Length
8 10 12 15 18 20 24 28 30 35
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
•
If the focal length for your lens is not listed above, select the value closest to
the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
•
When using a zoom lens, select the actual focal length at the zoom setting
being used in the same manner.
•
To change the focal length setting, use [Input Focal Length] in the [
A
Rec.
Mode 3] menu.
•
When using a lens without an
s
position or a lens with an
s
position with the
aperture ring set to a position other than
s
, set [23. Using Aperture Ring] to
[Enable] in the [
A
Custom Setting 4] menu. (p.259)
Input Focal Length Input Focal Length
OK OK
OK
Cancel Cancel
MENU
30 30 40 40
35 35
e_kb524_84percent.book Page 258 Friday, June 15, 2012 12:13 PM