Pentax K-30, Operating Manual

Page: 160 / 364

158
Sh
oo
ting
Setting
s
5
The outcome of cross processing varies each time a picture is taken. If a
cross processed image that you like comes out, you can save the Cross
Processing settings used in that image. A total of three Cross Processing
settings can be saved.
1
Press the four-way controller (
3
) in the single image display of
playback mode.
The playback mode palette appears.
2
Use the four-way controller (
2345
) to select
s
(Save
Cross Processing), and press the
4
button.
The camera will search for cross processed images starting from the
most recent image taken. (An hourglass icon is displayed while
searching.) When a cross processed image is found, the screen to save
the settings appears.
If there are no cross processed images, the message [No cross
processed image] appears.
3
Turn the front e-dial (
R
) to select
a cross processed image.
4
Use the four-way controller (
23
) to select a number, and
press the
4
button.
The settings of the selected image are saved to [Favorite 1 - 3] and the
selected image appears in the single image display.
You can also change the settings from the [
A
Rec. Mode 1] menu.
Saving the Cross Processing Settings of a Captured
Image
Save as Favorite 2 Save as Favorite 2
Save as Favorite 1 Save as Favorite 1
Saves this image's Cross Saves this image's Cross
Processing settings Processing settings
100-0001 100-0001
Save as Favorite 3 Save as Favorite 3
OK OK
OK
Cancel Cancel
MENU
e_kb524_84percent.book Page 158 Friday, June 15, 2012 12:13 PM