Pentax K 100D Super, Service Manual

Page: 59 / 95

76700 -58/94-
*Confirmation: [Connect] should display as follow
⑦
Execute the check/adjustment following the display screen as follows
1
：
EEPROM CHECKING
↓
2
：
EXPOSURE ADJUST
[
BV ADJUST
]
↓ Tools ： Focus master lens for 35mm (KML-01), Diaphragm set ring F8 (KA-0-1A)
↓
Light source (LV6,LV8,LV12,LV15) or (LV6,LV9,LV12,LV16)
↓
3
： AF AND RELATED ADJUST
↓
Tools: AF positioning jig (Square) for 27830, AF positioning jig (Cross) for 27250, Light source LV12
↓ Driver1.5mm (HD-M1.5), AF master lens for 2m, FA (F) 35-80mm F4-5.6,
↓
AF chart for 2m x2 (Exclusive item), FA Macro 50mmF2.8,
※ 2m AF chart have to be set as follows
1
）
Distance between chart and mount of camera --- 1,954.5mm
（＝
1.9545m
）
2 ） Chart should be set at perpendicularly against light axis of the lens
↓
[CCD POSITION ADJUST]
ADJUSTMENT
1) Alpha-CROSS -- . - Dump Start -- . Adjustment -- . Stop
2) Focus --- Start - . - Next . Stop . Close
* When replaced M100, Click M100 button and then start adjustment
Connect
76700
Initialize the data
(Yes/No)
Yes
Replaced Main PCB
？
No
T100ExChange
Did you exchange the
main pc board?
PDC Adj
Writing of initial EPROM.
6
： BATTERY LEVEL ADJUST