77420 - 75/107 -
③
When below message is displayed, set the stage in the X direction.
Turn ON the controller. (Confirm the meter is 1,000rpm)
Press [OK] button to start X adjustment.
④
Turn OFF the controller and Press [OK] button. (next adjustment will be started)
⑤
Turn OFF the controller. Change the position of camera and stage for Y adjustment.
[Caution]
The weight of the stage is very heavy, so pay attention the handling.
Do not hold black stand parts.
⑥
Set the chart
2.00m
from tripod screw on camera stand and
match the chart (
■
) with frame of spot measurement in the view
finder.
（
Go to the next page
）
ex. K10D
