Pentax 18173 - Optio 550 Digital Camera Operating Manual Download

Page: 87 / 160

aking Pictures

Press the OK button.

The Bracket mode is set.

Press and hold down the shutter release button.

Auto bracket shooting starts.
When shooting is finished, a message will be displayed
asking whether you want to continue shooting or not. To
continue shooting in auto bracket mode, select [Continue]
and press the OK button.

Playing Back Still Pictures

☞

p.26

• Check the pictures you have taken using the Playback mode.
• If you set auto bracket when you set the Continuous shooting

mode, continuous shooting will be canceled.

• The auto bracket setting will be canceled by pressing the

Menu/Fn button or OK button.

• Auto bracket mode is not available when TIFF is selected for

the image quality.

memo

e04_kb338_038_088_41e.qk 3/17/03 5:23 PM Page 85

Summary of Contents for 18173 - Optio 550 Digital Camera

































































































































































Search results

Summary of Contents for 18173 - Optio 550 Digital Camera

Reviews:

Related manuals for 18173 - Optio 550 Digital Camera

Brands by name

Popular brands

Pentax 18173 - Optio 550 Digital Camera, Operating Manual

Search results

Summary of Contents for 18173 - Optio 550 Digital Camera

Reviews:

Related manuals for 18173 - Optio 550 Digital Camera

Brands by name

Popular brands