manualshive.com logo in svg

Pentax 18173 - Optio 550 Digital Camera, Operating Manual

Share
Download
Pentax 18173 - Optio 550 Digital Camera Operating Manual Download Page 148

146

Appendix

Deleting

The largest file number is assigned to an
image and no more images can be saved.
Insert a new SD Memory
Card/MultiMediaCard or format the SD
Memory Card/MultiMediaCard. (p.126)

The image is being deleted.

Image folder could not be
created.

The SD Memory Card/MultiMedia Card you
have inserted is unformatted, or has been
formatted on a PC or other device and is
not compatible with this camera. (p.126)

This card is not formatted.

Compression of the image you captured
has failed. Change the recorded pixels or
quality levels, and take a picture again.

Compression error

The movie picture is being recorded.

Data being recorded

The image you are trying to delete is a pro-
tected image. (p.99)

Image protected

The alarm has been enabled.

Alarm set

e06_kb338_123_157_41e.qk  3/17/03  4:11 PM  Page 146

Summary of Contents for 18173 - Optio 550 Digital Camera

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands