Pentax 18173 - Optio 550 Digital Camera Operating Manual Download Page 114

Page: 114 / 160

112

Pla

ybac

k/Er

asing

Displaying and copying images using ACDSee™

Turn your computer on.

Make sure the camera is turned off and connect it to
your computer with the USB cable.

Make sure that there is an SD Memory Card/MultiMedia
Card in the camera.

Turn your camera on.

ACDSee starts up automatically and the list of images is
displayed. Go to Step

If ACDSee fails to start
up automatically, dou-
ble-click the [ACDSee]
icon on the desktop.

Your camera can be
found in the [My
Computer] window as
[Removable Disk].
Camera images can be
found in [My Computer]

→

[Removable Disk (or the name on the volume label on

the SD Memory Card/MultiMedia Card, if there is one)]

→

[DCIM]

→

[XXXPENTX]. (XXX is a 3-digit number.)

A list of the images will be displayed.

e05_kb338_089_122_41e.qk 3/17/03 5:21 PM Page 112

Summary of Contents for 18173 - Optio 550 Digital Camera

































































































































































Search results

Summary of Contents for 18173 - Optio 550 Digital Camera

Reviews:

Brands by name

Popular brands

Pentax 18173 - Optio 550 Digital Camera, Operating Manual

Search results

Summary of Contents for 18173 - Optio 550 Digital Camera

Reviews:

Brands by name

Popular brands