GENERAL SAFETY INSTRUCTIONS
Warnings for the safety of individuals and objects.
Carefully follow the instructions marked with the following symbols.
Warns that the failure to follow the directions given may cause electric
shock.
Warns that the failure to follow the directions given could cause serious
risk to individuals or objects.
Warns that the failure to follow the directions given could damage the
pump or the system.
WARNING: Read this manual carefully before installing this pump. Any
damage caused by failure to observe the directions contained in this
manual will not be covered by warranty.
WARNING:
Read this manual carefully before installing this pump. Any damage caused by failure to
observe the directions contained in this manual will not be covered by warranty.
WARNING:
Failure to follow the instructions in this manual may result in serious adverse health ef-
fects, or even serious or fatal injury. Failure to follow the instructions in this manual will in all cases
invalidate all guarantees and liability on the part of the manufacturer.
CHAPTER 1 - FEATURES
SWIMMEY series comprises single-bloc centrifugal pumps, with front suction, radial delivery, one
stage and peripheral impeller. Every pump is carefully tested and packed during its assembly. On
receiving of the pump, verify that the product complies with the requirements stated in the order and
that it has not been damaged during transportation. All damages should be immediately reported
to the dealer by and no later than 8 (eight) days from the date of purchase. Avoid dispersing and/or
disposing the packing in the environment, to allow it to be recycled and collected in special waste
disposal areas.
CHAPTER 2 - LIMITATIONS
SWIMMEY series pumps are suitable to pump chlorinated water from swimming pools. All the com-
ponents in contact with the water come in man-made polymer, which offers a double electric insula-
tion and full anti-oxidising properties.
WARNING
The pump cannot be used to move inflammable or dangerous liquids.
WARNING
Verify that the pump never runs without liquids.
MAX. TEMPERATURE OF PUMPED LIQUID
40° C
MAXIMUM/MINIMUM AMBIENT TEMPERATURE
45° C
MAXIMUM SUCTION HEIGHT (recommended)
3 m (with foot valve)
MAXIMUM OPERATING PRESSURE
2,5 bar
IP
Protection
IP
X5
DANGER
Electric shock risk
DANGER
DANGER
WARNING
English
3
