![background image](http://html.mh-extra.com/html/pentair/slimlite-56400/slimlite-56400_installation-and-user-manual_1524894007.webp)
SLIMLITE Pool Light Installation and User’s Guide
SLIMLITE Pool Light Installation and User’s Guide
7
Figure 7.
Remove
8 Hex head
screws
CIRCUIT BOARD - REMOVAL / INSTALLATION
Removing the SlimLite Light Circuit Board
Retaining nut (4x)
Light housing
Thermal
strip (2x)
Circuit board
connector plugs
circuit board
Circuit board
stud (4x)
Figure 8.
6. Using a ¼” nut driver, carefully remove the four retainer nuts from the light
assembly. See Figure 8. Place the nuts aside for reinstallation.
See Figure 8.
7. Unplug the two connector plugs from the circuit board. Lift up the circuit board
and remove it from the light housing base.
8. Carefully lift off the old thermal strips from the base of the light housing base
and discard.