1
M699/ TL-10111A
TABLE LAMP "BANKER" TOUCH SWITCH
Please read the user’s manual before using the product and keep it for
future reference.
A. INSTALLATION/ REPLACEMENT OF BULB
Instructions before installing or replacing the bulb:
- The cable must be disconnected from the socket.
- Place the lamp on a flat, stable and non-slippery surface.
- If the lamp was lit before, allow the lamp and the bulb to cool for at least 10 minutes
before any operation.
COMPATIBLE BULB
Halogen bulb
Characteristics:
1 bulb of 25W maximum not
included, base E27
B. USE OF THE LAMP
First, plug the lamp into the mains and perform the following:
Touch the base of the lamp lightly to light
it (low brightness).
Touch the base lightly again to obtain an
average brightness.
Touch the base lightly a third time for
strong brightness.
To turn the lamp off, touch the base
lightly again.
Power :
220-240V
50Hz
