3
Incorrectly installed or tested equipment may fail, causing severe injury
or property damage.
Read the following instructions in this owner’s manual
when installing and operating equipment. Have a trained
pool professional perform all pressure tests.
1. Do not connect system to high pressure or mains
water system.
2. Use equipment only in a swimming pool or spa pool
installation.
3. Install pump with at least 2 hydraulically balanced
main drains equipped with correctly installed, screw -
fastened, antientrapment certified covers according
to local regulations.
4. Trapped air in system can cause explosion.
Ensure all air is out of the system before operating or
testing equipment.
Silentflo is electrically connected. Ensure that it is isolated
from electrical supply during installation and any subsequent
service work.
The pump should be installed and serviced by a suitably
qualified person in order to avoid hazard.
These instructions are a guide only. Should you the installer or
owner of the product be unfamiliar with the correct installation
or operation of this product you should contact a suitably
qualified person for advice.
Freezing conditions will damage the unit, as water expands as
it freezes. Ensure that Silentflo is located so that it is not prone
to freezing, or ensure that the product is disconnected and
dried of water during cold conditions.
Installation
L300216_SilentFlo_OM_2012
Monday, 17 December 2012 1:32:22 PM
