Pump and DE Element Filter System Installation and User’s Guide
J.
Place the filter tank back onto the filter end of the systems base and align
the two screw holes in the tank foot with the two holes in the system base
that now contain the brass inserts.
K. Install a ¼-20 x 1-1/2” long screw and ¼” flat washer through one of the
screw holes in the tank foot. Tighten the screw into the brass insert in the
systems base. Repeat with the other hole located 180° opposite the first
one. See Figure 6.
L. Install the pump to filter connection hose to the inlet port of the filter.
Tightening the union nut that is attached to the filter only hand tight.
M. The pump may now be attached to the pump support side of the base. The
pump should be oriented as indicated in Figure 1.
Figure 6.
5
