Pump and DE Element Filter System Installation and User’s Guide
O. Connect the pump to filter connection to the discharge port of the pump.
Tighten the union nut hand tight.
P. Install the two (2) push-in fasteners through the slots in the foot of the
motor, into the two (2) holes in the system base near the release latch.
Figure 8.
Release latch
Pump foot
N. Slide the pump foot between the claw fasteners and the release latch. See
Figure 7. Seat the pump by pushing down on it until the release latch clicks
into place on the pump foot. See Figure 8.
Figure 7.
Release latch
Claw fastener
6
