PRE-INSTALLATION
T
Quick Connect Nut
Red Arrow
Water Filter Head
Water Softener
Alternative
INLET
OUTLET
Figure 2
The bypass valve comes pre-assembled and ready to install with the o-rings, split rings, and quick connect nuts. Push the
bypass valve into the head of the NaturSoft® Water Softener Alternative with the unthreaded ends oriented toward the tanks and
hand-tighten the quick connect nuts.
Bypass Valve Installation
The bypass valve(s) included with this system are designed for multiple water systems. This may result in the arrows on the
bypass valve(s) pointing differently than shown. If the arrows on your bypass valve(s) do not match the diagram, remove the
red arrows by pulling them straight up, turn them 180° to match the drawing, and push them back down onto the stem.
Notice
Notice: Head may come loose in transit. Please check head by tightening clock wise, hand tighten only, no more than 1/4
turn.
Head may not move at all or less than
1/4
turn.
WATER SOFTENER ALTERNATIVE WITH NATURSOFT® SALT-FREE TECHNOLOGY
• 5