![background image](http://html1.mh-extra.com/html/state-water-heaters/titan-stgpg-0303/titan-stgpg-0303_specification-sheet_1367229001.webp)
WATER HEATERS
500 Lindahl Parkway, Ashland City, TN 37015 • www.stateind.com
The
Expert’s
Choice
™
Commercial Gas Water Heater
■
Meets ASHRAE 90.1b-1992, and C.E.C. and New York Codes for
thermal efficiency and standby loss.
■
Glass-Lined Tank
– Exclusive corrosion protection with glass-lining.
Multiple anodes provide corrosion protection.
■
Power Gas Burner
– Electronic flame monitoring with direct spark
ignition. For added safety, all units are equipped with redundant gas
valves. Power gas burner requires 120 volt 60Hz service. A
NEGATIVE DRAFT is required in the vent piping. This is not a forced
draft burner.
■
Fully Automatic Controls
– Safety shut off, high temperature limit
control, dual thermostat (adjustable 120°F thru 180°F) for accurate
temperature control. Maximum inlet gas pressure 14˝ W.C.
■
Foam Insulation
– Saves fuel, helps reduce standby heat loss.
■
Jacket
– made of heavy gauge steel with baked enamel finish over
bonderized undercoat.
■
Fully Certified by U.L.
■
ASME Construction
– Available on GPG81 140, GPG81 199, GPG81
270 & GPG81 370. When specifying ASME construction, add the letter
“A” at the end of the model number. 160 psi working pressure.
■
A.G.A./ASME Rated Temperature & Pressure Relief Valve
–
Factory installed.
■
Barometric Draft Damper
– To ensure proper draft for maximum
efficiency.
■
Easy Cleaning
– Handhole cleanout(s) allows easy cleaning.
■
Professional Startup Service
– Furnished to assure most efficient
combustion and safe initial operation.
CAUTION:
Unit must be installed on non-combustible surface.
Other Features:
–
Two layers of high temperature ceramic fiber insulation in
combustion chamber
–
Flame inspection port opening
–
Mounted on rugged channel iron skids
–
Multiple anodes for protection.
Options:
–
Illinois School Code on GPG81 199 to GPG81 370
–
National Board Registration (ASME models only)
–
Low water cutoff
–
5 or 10 year extended limited warranty.
–
ASME (ON SELECTED MODELS)
Limited Warranty:
■
Limited Warranty Outline
–
If the tank should leak any time during the first three years, under the
terms of the warranty, State Water Heaters will furnish a replacement
heater; installation, labor, handling and local delivery extra.
– NOTE: This Outline Is NOT A Warranty.
For complete information,
consult the written warranty or State Water Heaters.