Pentair Intellitouch ScreenLogic, User Manual

Page: 30 / 116

20
IntelliTouch ScreenLogic User’s Guide
Adding Range Extender Kit for Large Home and Properties
For larger homes and properties it may be necessary to install the wireless Range Extender kit (P/N 520561). The
wireless Range Extender kit transfers the wireless signal for better coverage where you primarily use your Tablet
and/or PDA. The wireless Range Extender kit consists of two wall-plugs that plug into your home’s AC power wall
outlets. The first wireless extender wall-plug connects to the ScreenLogic wireless router via an Ethernet cable
(RJ45/CAT5). The second wall-plug does not require connection wires. This wireless extender wall-plug picks up
and broadcasts the ScreenLogic wireless router signal for better coverage in the area of the home where the
wireless Tablet and/or PDA are primarily used. For more information about the Range Extender, see page 86.
Advantages:
•
Better wireless coverage for larger homes and properties
•
Good wireless coverage to back of home and pool/spa area
•
Use your home’s electrical wiring instead of running an Ethernet cable
Disadvantage:
•
Requires Serial cable run from Protocol adapter to Load Center
LIVING ROOM
FAMILY ROOM
STUDY
ScreenLogic
wireless router, and
first wireless range
extender wall-plug
(via Ethernet cable)
KITCHEN
Second wireless
range extender
wall-plug
Pool
Spa
Existing DSL
or Cable
modem
IntelliTouch
Protocol Adapter
connected to Load
Center (*)
Existing wired
or wireless
router
Note (*) A wireless connection is available from the Protocol Adapter to the Load Center. This
eliminates the existing hard wire connection from inside your home to the equipment pad. For more
information see “ScreenLogic Wireless Connection Kit” on page 97.