![background image](http://html1.mh-extra.com/html/pentair/intellipool/intellipool_user-manual_1524706043.webp)
42
FIL
TRA
TION
HEA
TING PUMP
LIGHTING
ELECTRO L
YSER
AUX1
BUS
Suppl.
Com.
230 V
~
Neutral
Earth
Phase
A1
A2
FEEDBACK FIL
TRA
TION
USB
recognised
3 s
3 s
C
O
N
T
R
O
L
VALID
ESC
12/07/2018 15:23:48
Water temp.:+24.0°C
pH: 7.3 RedOx:629mV
Cond:5571uS 3.51g/l
Initialisation...
Pentair
IntelliPool
Init.:reset v355
C
O
N
T
R
O
L
VALID
ESC
example
Current version No.
3 s
The Control Center can be updated or reflashed. This procedure is reserved for qualified professionals with good IT knowledge. The update file is
available at Intellipool.eu/téléchargement.
Control Center: How to update the internal firmware
1.1 Unzip the file MAJ_Intellipool_Vx_xx.zip
1.2 Double click on USBXpressInstaller.exe
1.3 In the
Silicon Laboratories USBXpress Device Driver Installer window
,
click
Install
1.4 In the
Success
window which has opened, click
OK
- Make sure to have a surface to place the laptop on.
- Installing this program will ensure that the PC can send the required file via USB
1 - Preparation of the PC
- To read the version number of the Control Center, simply cut the electrical power supply and quickly look at the bottom right of the screen during
powering on. The display is in the form x.xx or xxx. The minimum version compatible for this operation is 3.51.
2 - Re-programming mode
- The menu texts evolve as the functions change. Updating the internal text file makes full use of the functions possible.
3 - Loading of the latest menu texts
1.3
1.4
2.1 - Press
Press the
Up/+ button
2.5 Remove the orange cover of the Control Center
2.6 Connect the USB/mini USB cable
between the PC and Control Center
2.7 The PC displays
USB recognised
2.2 - Cut for 3 sec. then re-supply
the power while keeping the button pressed
2.3
- Press
the
Up/+ button
for 3 more sec.
2.4
- Then release.
2.9 Click
Open
2.8 Double click
USBBootloader.exe
from the archive
MAJ_xxxxxxx_Vx_xx.zip
2.10 Click
Browse...
2.11 Open
ControlCenter_3_5_5_MAJ.hex
2.14 Cut the supply for a min. of 3 sec
2.15 Press
Esc
and
Valid
and simultaneously
reconnect the power supply.
2.16 As soon as it lights, for 2 sec,
check the version number
2.13 In the USB Bootloader window,
click
OK
2.12 Click
Download
Version No. which is going to be programmed
3.0 On the PC, open the Control Center file (visible as USB media)
3.1 Open the file
Texts
from the archive
MAJ_xxxxxxx_Vx_xx.zip
3.2 Copy the file content
Texts
from the archive
MAJ_xxxxxxx_Vx_xx.zip
in the file of the Control Center.
As the new .TXT files have the same name, they will overwrite the old ones (click OK for the overwrite request).
The update is finished. Disconnect the mini USB cable from the Control Center.
- In FILTRATION AUTO mode, it is normal that the filtration does not start again immediately. It will restart on the next full hour.