Pentair Hypro ARAG 520005, Operating Instructions And Parts Manual

Page: 2 / 20

- 2 -
Identification
Warning!
Read the instructions in this manual carefully. Hypro/ARAG cannot be held responsible for damage caused by
improper use or installation.
PRECAUTIONS:
1. Never spray the console with a pressure washer.
2. Never use solvents for cleaning console.
3. In case of electric welding, make sure to disconnect the battery cables.
4. Use only original Hypro/ARAG replacement parts.
On all requests for spare parts,
provide the serial number and
year of manufacture of the foam
marker given on the identification
plate, located on bottom side of
compressor/solenoid assembly.
ATTENTION!
Read the instructions contained in this manual carefully.
Hypro/ARAG cannot be held liable for damage caused by
improper installation or use or non-observance of the general
regulations for protection and safety at work. Foaming agents
may be hazardous due to their toxicity! Never use the foam
marker in enclosed or poorly ventilated places without wearing
the appropriate Individual Protection Devices.
Keep this manual with the foam marker.
Opening the tank cap may cause foaming agent to suddenly
come out!
This symbol draws special attention to operations where it
is necessary to:
• cut off the supply to the foam marker;
• lift the ring of the pressure relief valve on the tank cap and
discharge the remaining pressure as shown in the illustration.
California Proposition 65 Warning -- This product and related accessories contain chemicals known to the
State of California to cause cancer, birth defects or other reproductive harm.