Pentair Hydromatic TG-Pro System, Installation And Service Manual

Page: 10 / 12

10
1 21936D200 Cover – Sump 24" Plastic 1
1 21936D300 Cover – Sump 24" Poly 1
2 23901D301 Tank – FRP 24" x 60" 1
2 23901D304 Tank – FRP 24" x 72" 1
2 23901D306 Tank – FRP 24" x 84" 1
2 23901D308 Tank – FRP 24" x 96" 1
3 002380031 Cap – Screw (plastic) 6
3 19099A033 Cap – Screw (poly) 6
4 001560321 Washer – Flat (plastic) 6
4 05030A138 Washer – Flat (poly) 6
5 097813264 Brace – Valve Stem 1
6 085373165 Handle – Extension 2'-0" Deep 1
6 085373015 Handle – Extension 3'-0" Deep 1
6 085373035 Handle – Extension 4'-0" Deep 1
6 085373055 Handle – Extension 5'-0" Deep
7 145340083 Handle – 24" Discharge Deep 1
7 145340013 Handle – 36" Discharge Deep 1
7 145340163 Handle – 48" Discharge Deep 1
7 145340173 Handle – 60" Discharge Deep 1
8 010320031 Nut – Jam 1
9 24227B029 Hub – Tank Assy. 1-1/4" 1
10 24227B030 Plate – Backup 1
11 22251A004 Gasket 1
12 19101A017 Cap – Screw 4
13 010320031 Hex – Nut 4
14 05454A015 Washer – Lock 4
15 063750635 Gate Valve Assembly 1
16 149130035 Discharge Piping Assembly 1
17 129610783 Pipe – 1-1/4" x 23-1/4" SST 1
17 129610913 Pipe – 1-1/4" x 27-5/8" SST 1
18 07947A020 Cross – 1-1/4" SST 1
18a 05004A122 Bushing – 1-1/4" x 1/2" PVC 1
18b 149850001 Valve – Relief 1
19 148790001 Valve – Anti-Siphon 1
20 05004A114 Bushing – 1-1/4" x 3/4" PVC 1
21 05008A059 Nipple – 3/4" Close, PVC 1
22 24335A001 4" Inlet Grommet 1
23a 2397A012 Rope – Liftout, 15' 1
23b 23828A005 Chain – Liftout, 8' (shown) 1
24 140841001 Hub – Junction Box 2" NPT 1
25 001760081 Cap – Screw 4
26 001120021 Hex – Nut 4
27 131070021 Washer – Sealing 4
28 128700021 Box – Junction Nema 6x 1
29 148870001 Stand – Wire 1
30 002380071 Cap – Screw 1
31 001560321 Washer – Flat 2
32 010320031 Hex – Nut 1
33 27012B505 Bracket, SST for Pressure Bell 1
33 22470B005 Tree Bracket, SST for Floats 1
37 21813A300 Float Switches 3
38 14755A002 Float Bushings (not shown) 3
Ref. Part Part
No. No. Description Qty.
Fiberglass
Simplex
Parts List
Ref. Part Part
No. No. Description Qty.
ORDERING REPLACEMENT PARTS: Product improvements are made from time to time. The latest part design will be fur-
nished as long as it is in ter change able with the old part.When ordering re place ment parts, always furnish the fol low ing information:
(1) pump serial num ber, (2) pump model and size, (3) part description, (4) part number, (5) im pel ler diameter (if ordering impeller),
(6) quan ti ty required, and (7) shipping instructions.
Notes: S — Parts in Seal Kit C — Parts in Carbide Seal Kit I — Parts in Impeller Kit R — Parts in Rebuild Kit *Consult Factory
— Fill Oil to above the Motor Windings