Pentair HAFFMANS RPU-352, Instruction Manual, Page: 38 / 112

HAFFMANS RPU 352, RPU 353, RPC 80 RPC 50
2
Page 38 of 112 RPU 352, RPU 353, RPC 80, RPC 50
13.4 CLOCK
You can set the current date and time. Setting the clock in this way is optional. If
recorded files are printed and then erased using the RPC-80 printer/charger then
the clock settings of the RPC-80 will be automatically copied into the RPC-353. If
set, the clock will be used when results are shown on the display.
The screen first shows the present setting for the date. If you wish to make any
changes then activate the lower right (+/-) switch otherwise move on by activating
the OK switch.
You change the year, month and day by using the lower switches. A flashing
indicator appears under the item you are changing. When the first item is correct
use the top right (
) switch to move to the next item and so on.
If you make a mistake you cannot move the cursor backwards but you can start
the date entry process again as described in the next paragraph.
When you have moved past the last item the screen changes and you have the
chance to make more changes by activating the (+/-) switch again. If the date is
now correct you must save the changes you have made by activating the OK
switch.
The screen then changes to show the present setting for the time on a 24 hour
clock system. If you wish to make any changes then activate the lower right (+/-)
switch otherwise move on by activating the OK switch.
You change the hours and minutes by using the lower switches in the way
described above for the date. The seconds cannot be changed and will always be
set to zero. You must end by saving the changes you have made by activating
the OK switch.
13.5 DISPLAY UNITS
You can choose to display all temperatures in either Celsius (°C) or Fahrenheit
(°F).
Whenever you change the temperature display units the PU calculation is also
changed to the default values for those units (See below).
ONLY FOR PRU-353:
You can choose to display gauge pressures in bar, psi or kg/cm
2
.