26
INSTALLATION AND OPERATION MANUAL – OWNER'S RECORD PEM MANUAL – PARTICULATE EMISSION MONITOR
9.1.4 Viewing Self-test Results
1. Go to the
DUST
reading (this is the top menu item).
2. Repeatedly press RIGHT to toggle through the self-test result as follows
ZERO
Zero test result
REF
Reference test result
S_C
Short-circuit (contamination) test result
NOTES:
(i) If the tests have not run yet, then ‘
- -
’ is displayed.
(ii) While the tests are running no values will be shown. Wait for the green LED to stop flashing (see next section).
9.2 SELF-TEST LED
The Self-test LED is used to indicate a self-test failure.
Self-Test LED solid
GREEN
Self-tests PASS
Self-Test LED flashing
GREEN
Self-tests are RUNNING
Self-Test LED
RED
Self-tests FAIL (Relay 1 activates)
Summary of Contents for GOYEN MECAIR PEM
Page 6: ......