System
Problem
Possible Cause
Solution
Flowing or dripping water at drain after
cleaning cycle.
Debris is preventing #3 or #4 valve disc from
closing.
Remove debris.
Worn #3 or #4 valve disc.
Replace valve discs.
361 control will not complete a cleaning cycle
automatically..
AC adapter or motor not connected.
Connect power.
Debris is preventing camshaft from rotating.
Remove debris.
Defective motor.
Replace motor.
Backwashes or purges at excessively low or
high rate.
No drain line flow control.
Install drain line flow control.
Restricted drain line.
Remove restriction.
TROUBLESHOOTING
10 •
AUTOTROL
360/361 Filter Valves
