5
ENGLISH
FRANÇAIS
ESP
AÑOL
Failure to follow instructions could result in fire or explosion
with serious injury or property damage. This conversion kit
is to be installed by a Pentair Water Pool and Spa, Inc. (“Pentair”) distributor or
other qualified agency in accordance with the manufacturer’s instructions and all
codes and requirements of the authority having jurisdiction. The qualified agency
performing this work assumes responsibility for this conversion. The term “qualified
agency” means any individual, firm, corporation or company which either in person
or through a representative is engaged in and is responsible for (a) the installation
or conversion of gas piping or (b) the connection, installation, repair, or servicing of
equipment, who is experienced in such work, familiar with all precautions required,
and has complied with all the requirements of the authority having jurisdiction.
INSTRUCTIONS FOR CHECKING THE GAS PRESSURE
THROUGH THE GAS CONTROL VALVE.
Risk of fire and explosion. Improper installation, adjustment, alteration, service, or
maintenance of the Gas Control Valve can lead to fire or explosion, causing loss of
life, personal injury, or property damage.
These instructions are for the use of qualified service technicians only! Do not
attempt this procedure unless you have been trained and certified in the care
and repair of gas-fired appliances! Do not attempt this procedure if you are not
confident about following instructions!
This appliance is equipped with an unconventional gas control valve that is factory
set with a manifold pressure of –0.2” wc. Installation or service must be performed
by a qualified service technician or the gas supplier. If this control valve is replaced,
it must be replaced with an identical control.
NOTICE:
Before converting the heater, make the necessary gas connections to
the new gas supply, following the instructions in the UltraTemp ETi Installation and
User’s Guide (P/N 475922).
Gas Connections
