manualshive.com logo in svg

Pentair Pool Products IntelliChlor CIC60P, Installation And User Manual

Share
Download
Pentair Pool Products IntelliChlor CIC60P Installation And User Manual Download Page 33

27

IntelliChlor Electronic Chlorine Generator Installation and User’s Guide

To install the cell:

1. Using PVC glue, mount the PVC couplings to the plumbing pipe. Allow the glue to dry.

2. Mount the cell to allow access to the control panel. Install the cell onto the couplings.

Ensure the O-rings are seated properly.

3. Switch on the pump and visually inspect for leaks around the couplings.

Connecting the Cell Power Cable to the Power Center

After the cell installation is completed, connect the power cable to the Power Center:

•

Align the four (4) pins of the cell power cord connector with the socket on the bottom of the Power

Center and insert the connector. Turn the round socket nut until it locks the connector in place.

Connector socket nut.

To cell assembly

     

 

 CAUTION 

- The CIC60P or CIC60S can only

be plugged into a PC100 or CPC100 power
center.  Do not plug into IntelliTouch, EasyTouch
or SunTouch systems.

Summary of Contents for IntelliChlor CIC60P









































Reviews:

No comments

Brands by name

Popular brands

Load more brands