PENTAGRAM Nomad GT (P 5220)
8
Legend:
1.
Sleep button:
•
To turn on the sleep mode (energy saving), press and hold the button for approx. 5 seconds.
•
To turn off the sleep mode (energy saving), press and hold the button for approx. 3 seconds.
2.
Microphone.
3.
LCD touch screen.
4.
Battery charging LED.
5.
Stylus – allows precise operation of the device.
6.
SD card slot.
7.
Headphones socket – when connected, the headphones are used instead of the built-in loudspeaker.
8.
Video input (AV-IN) – option; an external video device can be connected here.
9.
USB socket.
10.
Loudspeaker – if no headphones are connected to the device, all the sounds will be played through the
built-in loudspeaker.
11.
Switch – when in ON position (left side), the device is turned on. To turn it off, just slide the switch to the
OFF position (right side).
Memory card
Insert the memory cards into the device in such a way so that when looking at the device front, the card label is
visible, and when looking at the device back, the card connectors are visible.
To remove the card from the device, press the card so that it gently slides out, and then pull it out. Prior to
removing the card, make sure that all the applications accessing it (like the media player, the navigation
application) have been closed and that no files are being transferred from/to the card. Some navigation
applications use the memory card for storing the configuration and map files. If you remove such a card, it may
cause the application to operate improperly, and in extreme cases even the necessity to reinstall the application.
NOTE! Removing the card when it is in use can cause damage or loss of data, application crash or it
can even freeze the device.
Battery charging
In the top right corner of the main menu there is the icon representing the battery charge. When the icon is filled
with bars, it means the battery is fully charged. If the icon is empty, the battery is very low and you have to
charge it as quickly as possible. The battery will start charging automatically after connecting the device to the
AC charger or the car charger, plugged in the appropriate socket. During charging, the bars in the icon appear
and disappear one by one, and you can operate the device as normal. The LED under the touch screen is an
additional battery charge indicator – it is red during charging and becomes green when the charging is
complete.
