Cerberus P 6391
7
Back Panel
Label
Used for...
POWER
Connecting with supplied power adapter
LAN 1-4 (RJ-45)
Connecting with computers/devices through Ethernet cable
WAN (RJ-45)
Connecting with DSL/cable modem through Ethernet cable
RESET
Resetting the device.
ANTENNA (RP-SMA)
Connecting wireless antenna
Default Settings
Before changing configuration familiarize yourself with these default settings.
IP Address
192.168.1.100
Subnet Mask
255. 255. 255.0
SSID PENTAGRAM
P
6391
DHCP Server
Enabled
DHCP Server IP Address Pool
100 IP addresses
from 192.168.1.101
IP Address Lease Time
7200 seconds (2 hours)
User Name
admin
Password
pentagram
It is recommended to change User Name and Password as soon as possible.
If you ever forget the password to log in, you may need to restore the factory default settings.
This procedure is described on the next page.
Resetting router
•
Use
the
Factory Defaults
function on
System Tools
->
Factory Defaults
page in the
router's Web-based Utility, or
•
Use
the
RESET
button: First, turn off the router's power. Second, press and hold the
default reset button then turn on the router's power, until the SYS LED lights up (about 3
seconds). Last, release the reset button and wait for the router to reboot.
Summary of Contents for Cerberus P6391
Page 4: ...Cerberus P 6391 4 ...