Pentagram Cerberus P6391 Installation And Operation Manual Download Page 54

Page: 54 / 56

Cerberus P 6391

Sorted Rules

- Here displays sort as desired. Click the

Reset All

button to reset, or

Delete

All

button to delete all statistics.

IP Address/MAC Address

– The IP and MAC Addresses displayed with statistics.

Total: Packets

– The total amount of packets received and transmitted by the router.

Total: Bytes

– The total amount of bytes received and transmitted by the router.

Current: Packets

– The total amount of packets received and transmitted in the last Packets

Statistics interval seconds.

Current: Bytes

– The total amount of bytes received and transmitted in the last Packets

Statistics interval seconds.

Current: ICMP Tx

– The total amount of the ICMP packets transmitted to WAN in the last

Packets Statistics interval seconds.

Current: UDP Tx

– The total amount of the UDP packets transmitted to WAN in the last

Packets Statistics interval seconds.

Current: TCP SYN Tx

– The total amount of the TCP SYN packets transmitted to WAN in the

last Packets Statistics interval seconds.

Modify

– Click on

Reset

to reset, or

Delete

to delete statistics for this entry.

Summary of Contents for Cerberus P6391

























































Search results

Summary of Contents for Cerberus P6391

Reviews:

Brands by name

Popular brands

Pentagram Cerberus P6391, Installation And Operation Manual

Search results

Summary of Contents for Cerberus P6391

Reviews:

Brands by name

Popular brands