Cerberus P 6391
19
Network / WAN
Appearance of this page depends on option selected from
WAN Connection Type
list.
•
Dynamic
IP
Select this
WAN Connection Type
, if your ISP is running a DHCP server.
Host Name
- This field is required to be filled by some service provider.
IP Address
- The IP address assigned by your ISP dynamically.
Subnet Mask
- The subnet mask assigned by your ISP dynamically.
Default Gateway
- The default gateway assigned dynamically by your ISP.
Click the
Renew
button to renew the IP parameters from your ISP.
Click the
Release
button to release the IP parameters.
MTU Size
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs you need reduce the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your ISP
connection.
Use These DNS Servers
- If your ISP gives you one or two DNS IP addresses, select
this option and enter the primary and secondary addresses into the correct fields.
Otherwise, the DNS servers will be assigned dynamically from ISP.
Primary DNS / Secondary DNS
- (Optional) Enter the DNS IP address in dotted-decimal
notation provided by your ISP.
Note:
If you get
'Address not found'
errors when you go to
a Web site, it is likely that your DNS servers are set up improperly. You should contact
your ISP to get DNS server addresses.
Get IP with Unicast DHCP
- A few ISPs' DHCP servers do not support the broadcast
applications. If you can't get the IP Address normally, you can choose Unicast. (You
generally need not check this option).
Click the
Save
button to save this settings.
Summary of Contents for Cerberus P6391
Page 4: ...Cerberus P 6391 4 ...