3-13
Chapter 3 Scanning and Settings
3.6.5 Hardware Information
In [Hardware info] page, you can view the pen status which inclueds WorldPenScan X
battery status, F/W version and USB connection status.
If you already passed the hardware identify via USB cable, and if now you want to
connect WorldPenScan X with Mac via Bluetooth, please follow the steps below:
1. Open WorldPenScan software and click
on the toolbar
.
2. Swith to
[
Hardware Information
]
page, then turn on your WorldPenScan X.
3. Click [Connect] button, system will start searching and connecting automatically,
once the system prompt connect success, you can start to use WorldPenScan X.
4. Next time, there is no need to manually connect WorldPenScan X with Mac again,
just turn on the pen scanner and software, the connection will be established
automatically.
Note: When the connection is established, please wait 3sec then start to scan. If you found
the connection cannot be established, please turn off the Bluetooth on Mac, and
then turn it on again, then try to connect again.
