P E N N Y + G I L E S D R I V E S T E C H N O L O G Y
T I L L E R M O D U L E
Solo Technical Manual SK74484/1
Chapter 3:
37
Tiller Module Installation
1.0
Introduction
This chapter will help you to install the range of Tiller Modules for
use with the Solo series of controllers. Please read this chapter
carefully as it will help to ensure the Tiller Module operates safely
and reliably. It will also help you to meet the relevant safety
requirements of TÜV Product Service (Germany) and ISO
standards depending on the application.
Study also Chapter 1: Operation and Chapter 2: Installation of this
manual.
There are 3 versions of the Tiller Module - TruCharge Indicator
and Diagnostics, Momentary Switch Inputs and a combination of
both. Depending on the version with which you are working, not
all of the sections in this chapter may be applicable. Refer to the
data sheet for the exact Tiller Module you have to identify which
functions are present.
2.0
Mounting
2.1
Handling
The Tiller Module contains electronic components which may be
sensitive to static electricity. Always store the modules in the
original packaging until they are ready to be used. When the
modules are removed from the packaging, ensure correct anti-static
precautions are taken.
2.2
Fixing
The vehicle's control panel should be fitted with holes as suggested
in Fig 3 shown below
Chapter
3