V46 and V47 Repair Parts and Service Instructions
® Johnson Controls and PENN are registered trademarks of Johnson Controls in the
United States of America and/or other countries. All other trademarks used herein are the property
of their respective owners. © Copyright 2018 by Johnson Controls. All rights reserved.
www.penncontrols.com
European Single Point of Contact:
NA/SA Single Point of Contact:
APAC Single Point of Contact:
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142
CHINA
10
Extension Sleeve
1
1
1
Seat Wrench
1
1
1
1
1
1
1
1
1
1
1
Sensing Element
Contact Application Engineering at (414)-524-5535
Stem Washer
1
ISO-loss Washer
2
1
1
1
O-ring Seals
2
2
1.
3/8, 1/2, and 3/4 in. valves require two diaphragms on the spring end and two diaphragms on the sensing element end. One
through 2-1/2 in. valves require two diaphragms on the spring end and three diaphragms on the sensing element end.
2.
Reverse acting 3/8 in. valves do not require an ISO-loss washer.
Table 1: Renew Kits (Part 2 of 2)