MANUAL SGM800
32
3
Main Menu
In the Main menu you can change the
Setpoints
(this option is not available in the
SGM810 or controllers), display the
TAC
code and display the
CAL
code.
Setpoints. (this option is not available in the SGM810)
The SGM800 has four outputs that can swithch on/off on different levels.
These levels have to be filled in at the setpoint menu.
Press key 3 <2 sec. to go into the
Main menu
.
Press key 2 <2sec. to the setpoint change menu.
Press key 1 <2 sec. to select a different setpoint (1-4). Press key 2 <2 sec. to change the
selected setpoint. Key 1 is used for changing the number (1-9), key 2 is used for
changing the position of the cursor. Press key 3 >2sec. to confirm.
Up
Down
Left
Right
Confirm
When the selected setpoint is changed, the display changes to the next setpoint.
