MANUAL SGM800
26
Go to Start Quick setup and click the button:
The following tree is shown:
Use step 1 to set the Weigher Parameters:
The settings you can make are:
Unit:
set the weigher unit (kg, lbs, T, etc.) this will be shown in PI.
Decimal
point:
Set the decimal point to show the correct weigher value.
Step:
Choose
between 1, 2, 5, 10, 20, 50, 100, 200, 500
Maxload:
Set maximum load to prevent overload by the user. The indicator will not
show any weight above the filled in value. Range: 0
–
999999.
