Arctica 4806xp switch Installation Guide Chapter 1 Introduction
2
Arctica 4806xp switch provides 48 10Gb SFP+ and 6 40Gb QSFP+ ports. Each
QSFP+ port can be split into 4 10Gb SFP+ ports.
◇
Support 10Gb Ethernet
10Gb Ethernet which adopts full-duplex technology instead of low-speed, half-duplex
CSMA/CD protocol, is a big leap in the evolution of Ethernet. 10Gb Ethernet can be de-
ployed in star or ring topologies. With 10Gb Ethernet, Arctica 4806xp switch provide
broad bandwidth and powerful processing capacity. It is suitable for metropolitan net-
works and wide area networks. Using Arctica 4806xp switch, users can simplify network
structures and reduce cost of network construction.
◇
Networking Protocols
Arctica 4806xp switch supports 802.1d/w/s, 802.1Q, 802.1p, 802.3ad, 802.3x,
GVRP, DHCP and SNTP etc. The switch also supports comprehensively the multicast
protocols such as IGMP, DVMRP and PIM. Moreover, Arctica 4806xp switch supports
RIPv1/2, OSPF and IPv6. All these protocols supported enable Arctica 4806xp switch to
meet the requirements of complex network constructions.
◇
ACL
Arctica 4806xp switch supports comprehensively ACL policies. The traffic can be
classified by source/destination IP addresses, source/destination MAC addresses, IP
protocols, TCP/UDP, IP precedence, time ranges and ToS. And various policies can be
conducted to forward the traffic. By implementing ACL policies, users can filter the virus
packets such as “Worm.Blaster”, “Worm.Sasser” and “Red Code” etc. Arctica 4806xp
switch also supports IEEE802.1x port based access authentication, which can be de-
ployed with RADIUS, to ensure the port level security and block illegal users.
◇
QoS
Arctica 4806xp switch fully supports DiffServ Module. Users can specify a queue
bandwidth on each port. WRR/SP/SWRR scheduling is also supported. Arctica 4806xp
supports the port security. Users can deploy trusted CoS, DSCP, IP precedence and port
priority. User can also modify packets’ DSCP and COS values. The traffic can be classi-
fied by port, VLAN, DSCP, IP precedence and ACL table. User can also modify packets’
DSCP and IP precedence values. Users can specify different bandwidths for
voice/data/video to customize different qualities of service.
◇
3D-SMP Ready
Arctica 4806xp is up to the mustard of Self-defending security region management
strategy according to Netware. It is supported interaction with some security system such
as firewall, IDS, etc. It can defense the virus and aggress effectively from the extranet
and internet. Thus enhance the security and stability of the network-wide.
◇
Perfect Web Management.
Arctica 4806xp supports SNMP, In-band and Out-of band Management, CLI and
